General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Energizer Power Max P16K Pro Overview
The Energizer Power Max P16K Pro is a 2018 Android device from Energizer. It combines the Mediatek MT6763T Helio P23 (16 nm) and a 5.99-inch display, running Android 8.0 (Oreo). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Energizer Power Max P16K Pro
The Energizer Power Max P16K Pro is a 2018 Android device from Energizer. It runs the Mediatek MT6763T Helio P23 (16 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 8.0 (Oreo). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched boot image (fastboot)
Bootloader unlock on Energizer
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- This device is not confirmed released; root information is provisional until retail firmware exists.
FAQ
Can I root the Energizer Power Max P16K Pro?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Energizer procedure.
Does the Energizer Power Max P16K Pro support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.
Will root the Energizer Power Max P16K Pro void my warranty?
Energizer will generally treat a rooted Energizer Power Max P16K Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Energizer Power Max P16K Pro run?
It runs Android 8.0 (Oreo). The specifications table on this page lists the full software details.
Similar Devices
Energizer E242s+
Energizer H67G
Energizer U683S
Energizer Hard Case P28K
Energizer Ultimate 65G
Energizer Ultimate U652S
Energizer E246SC
Energizer E288s